RC200 FAQ
6
time, the computer booted up fine. It recognized the card and installed the drivers off the CD provided. I
tried attaching the 320 GB drives once more, yet the problem happened again. Please let me know what
to do.
Answer:
Please try to follow the below instructions, hope it can solve this customer's issue.
1. Insert a blank floppy disk into the floppy drive.
2. Download the zip file named “Solve the RC-200 Boot Issue” from Rosewill RC200 driver website.
Unzip the file as “exe” and put it into the floppy.
website link: (http://www.rosewill.com/download/search_details.aspx?type=2&product=429)
3. After it finished, please power up the system with this floppy.
5. Question:
I purchased the RC-200 to add extra IDE drive capability to my new motherboard with NVIDIA nForce
550 chip set. When I connect my IDE HD to the first IDE channel my workstation tries to boot to the
RC-200 drive and not the SATA drive connected to the motherboard. If I connect the drive to the
second channel my computer can’t see the drive connected to the RC-200. I am guessing I should
have purchased the RC-208 instead of the RC-200, but is there a way to disable the BIOS so I can use
the RC-200 for my IDE hard drive? The single IDE channel on the MB is being used for 2 dvd/rw drives
and I can’t get the IDE cable to reach the DVD drives from the RC-200. Any help would be appreciated.
Answer:
Please try to follow the below instructions, hope it can solve this customer's issue.
1. Insert a blank floppy disk into the floppy drive.
2. Download the zip file named “Solve the RC-200 Boot Issue” from Rosewill RC200 driver website.
Unzip the file as “exe” and put it into the floppy.
website link: (http://www.rosewill.com/download/search_details.aspx?type=2&product=429)
3. After it finished, please power up the system with this floppy.
6. Question:
1. Configuration
O/S: Windows XP on both
Two dell computers "Diminsion", both using Maxtor drives, and Rosewill RC-200.
First Dell has 2 CD/DVD drives connected to channel 2 on the Rosewill adapter, and a Maxtor 120GB
HD connected to channel 1. This system has 2 onboard IDE channels, that are unable to support drives
larger than 70GB
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern