Rosewill RNX-N4PS Bedienungsanleitung PDF herunterladen (Seite 72)

Wireless Router RNX-N4PS User Manual

LAN Settings: This page displays the Broadband router LAN port’s current LAN & WLAN

information. It also shows whether the DHCP Server function is enabled /

disabled. Wireless configuration details such as SSID, Security settings,

BSSID, Channel number, mode of operation are briefly shown.

WLAN Settings: View Broadband router’s current configuration settings. Device Status

displays the configuration settings you’ve configured in the Wizard / Basic

Settings / Wireless Settings section

- LAN

The LAN Tabs reveals LAN settings which can be altered at will. If you are an entry level user,

try accessing a website from your browser. If you can access website without a glitch, just

do not change any of these settings.

Click <Apply> at the bottom of this screen to save the changed configurations.

IP address: It is the router’s LAN IP address (Your LAN clients default gateway IP

address). It can be changed based on your own choice.

IP Subnet Mask: Specify a Subnet Mask for your LAN segment.

802.1d Spanning Tree: This is disabled by default. If 802.1d Spanning Tree function is

enabled, this router will use the spanning tree protocol to

prevent network loops.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 81 82

Keine Kommentare

Rosewill RNX-N4PS Bedienungsanleitung Seite 72