Rosewill RNX-N4PS Bedienungsanleitung PDF herunterladen (Seite 57)

Wireless Router RNX-N4PS User Manual

Enable Port Forwarding: Enable or disable Port Forwarding.

Description: The description of this setting.

Local IP / Local Port: This is the LAN Client/Host IP address and Port number that the

Public Port number packet will be sent to.

Type: Select the port number protocol type (TCP, UDP or both). If you are unsure, then

leave it to the default “both” setting. Public Port enters the service

(service/Internet application) port number from the Internet that will be re-

directed to the above Private IP address host in your LAN Network.

Public Port: Port number will be changed to Local Port when the packet enters your

LAN Network.

Add Port Forwarding

Fill in the "Description" , "Local IP", "Local Port", "Type" and “Public Port” of

the setting to be added and then click <Add> button. Then this Virtual Server

setting will be added into the "Current Port Forwarding Table" below. If you find

any typo before adding it and want to retype again, just click <Clear> and the

fields will be cleared.

Remove Port Forwarding

If you want to remove Port Forwarding settings from the "Current Port

Forwarding Table", select the Port Forwarding settings you want to remove in the

table and then click "Delete Selected". If you want to remove all Port Forwarding

settings from the table, just click the <Delete All> button. Click <Reset> will clear

your current selections.

Click <Apply> at the bottom of the screen to save the above configurations.

- Port Triggering (Special Applications)

Some applications require multiple connections, such as Internet games, video

Conferencing, Internet telephony and others. In this section you can configure the router

to support multiple connections for these types of applications.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 81 82

Keine Kommentare

Rosewill RNX-N4PS Bedienungsanleitung Seite 57