Rosewill RXS-3323 Bedienungsanleitung PDF herunterladen (Seite 33)

Internet Camera RXS-3323/RXS-4324 User Manual

PPPoE:

PPPoE: Stands for Point to Point Protocol over Ethernet

A standard builds on Ethernet and Point-to-Point network protocol. It allows your device with

xDSL or cable connects with broadband network directly, then your device can dial up and get a

dynamic IP address. For more PPPoE and Internet configuration, please consult your dealer or

ISP.

The device can directly connect to the xDSL, however, it should be setup on a LAN environment

to program the PPPoE information first, and then connect to the xDSL modem. Power on again,

then the device will dial on to the ISP connect to the WAN through the xDSL modem.

The procedures are

• Connect to a LAN by DHCP or Fixed IP

• Access the device; enter Setting -> Network -> PPPoE as below

1. PPPoE:

To enable or disable the PPPoE service here.

2. User name:

Type the user name for the PPPoE service which is provided by the ISP.

3. Password:

Type the password for the PPPoE service which is provided by the ISP.

4. IP address, Subnet

mask, and Gateway

(read only):

Shows the IP information got from PPPoE server site.

5. Status:

Shows the Status of PPPoE connection.

Streaming:

RTSP is a streaming control protocol, and a starting point for negotiating transports such as RTP,

multicast and Unicast, and for negotiating codecs. RTSP can be considered a "remote control" for

controlling the media stream delivered by a media server. RTSP servers typically use RTP as the

protocol for the actual transport of audio/video data.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 76 77

Keine Kommentare

Rosewill RXS-3323 Bedienungsanleitung Seite 33