Rosewill RXS-3323 Bedienungsanleitung PDF herunterladen (Seite 30)

Internet Camera RXS-3323/RXS-4324 User Manual

could assign the second port number of http protocol, and the WAN users should follow

the port number to login. If the http port is not assigned as 80, users have to add the port

number in back of IP address. For example: http://192.168.0.100:8080.

Therefore, the user can access the device by either http://xx.xx.xx.xx/, or

http://xx.xx.xx.xx:xxxx/ to access the device.

If multiple devices are installed on the LAN and also required to be accessed from the

WAN, then the HTTP Port can be assigned as the virtual server port mapping to support

multiple devices

Wireless:

This function only supports RXS-4324, the wireless version of Rosewill’s Network

Camera. You will not see this function in RXS-3323.

1. Setting (Easy

Installation):

This provides you with an easy setup for configurtion of the Wireless Setting:

Step 1: Select SSID of wireless router or access point (AP).

Step 2: Key in security key of WEP or WPA. Then click “Submit” button to

activate wireless setting.

2. Site survey:

Click the “Refresh” button. It will refresh information window which list is the result of

a network scan. Access points with a disabled SSID Broadcast will not appear unless the

camera is associated with it.

3. MAC address:

Displays the Ethernet MAC address of the WLAN card. Note that user can not change it.

4. Interface Select:

“Wired (Ethernet) only” or “Auto – wired if cable connected otherwise wireless”:

Choose wired or wireless mode. However, note that wired is priority.

5. Type:

Select one of WLAN modes from Infrastructure or Ad-Hoc mode.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 76 77

Keine Kommentare

Rosewill RXS-3323 Bedienungsanleitung Seite 30