Rosewill RC-209 Bedienungsanleitung

SATA 4 Port PCI Adaptor with RAID RC209User Manual

8User ManualSATA 4 Port PCI Adaptor with RAID RC2093. Select RAID0, then press Enter.4. Select the number of drives then press Enter.5. Select A

9User ManualSATA 4 Port PCI Adaptor with RAID RC20912. Press Ctrl+E to exit the BIOS.13. When asked Are you sure to exit(Y/N)?, press Y to exit and

10User ManualSATA 4 Port PCI Adaptor with RAID RC209Creating a SPARE DriveThis function is used when you want to backup your data by adding a new HD t

11User ManualSATA 4 Port PCI Adaptor with RAID RC209Auto configuration (recommended)The default chunk size is 64k when selecting Auto configuration.1.

12User ManualSATA 4 Port PCI Adaptor with RAID RC2093. Select RAID5, then press Enter.4. Select the number of drives then press Enter.5. Select

13User ManualSATA 4 Port PCI Adaptor with RAID RC2099. When asked Are you sure to exit(Y/N)?, press Y to exit and reboot.10. Continue with FDISK and

14User ManualSATA 4 Port PCI Adaptor with RAID RC209BIOS will show up and indicate the devices attached to it.Driver InstallationQuick guide:1. If y

15User ManualSATA 4 Port PCI Adaptor with RAID RC209 Choose the correct OS for your future system. Then choose “Standard PC

16User ManualSATA 4 Port PCI Adaptor with RAID RC209 Keep the floppy disk in floppy drive. PC will notice you as below if you take them off

17User ManualSATA 4 Port PCI Adaptor with RAID RC209 After you install RC-209 successfully by floppy disk, installation will lead you back t

Content • Feature highlights ... • Package content

18User ManualSATA 4 Port PCI Adaptor with RAID RC209For New InstallationA new installation requires a floppy disk for the driver installation. To make

19User ManualSATA 4 Port PCI Adaptor with RAID RC2096. Insert the floppy disk, then press Enter.7. Select Silicon Image SiI 3114 SoftRaid 5 Control

20User ManualSATA 4 Port PCI Adaptor with RAID RC209 file’s location. Press Next to continue to setup. (Change D: to match your CD-ROM driv

21User ManualSATA 4 Port PCI Adaptor with RAID RC2093. Click Finish.4. Remove the driver CD, close all open Windows, then restart Windows to compl

1User ManualSATA 4 Port PCI Adaptor with RAID RC209SiI 3114 SATA PCI CardFeature Highlights• Silicon Image SiI3114 SATA controller chip• Compliant

2User ManualSATA 4 Port PCI Adaptor with RAID RC209Magic Switch introduction and jumper settingBefore installing the SiI 3114 SATA PCI Card, please se

3User ManualSATA 4 Port PCI Adaptor with RAID RC209Step by step photo installation of Magic Switch 1. There are six SATA ports in RC209 RAID adapter.

4User ManualSATA 4 Port PCI Adaptor with RAID RC209 Mode 1 (Default) - ABCD Active Mode 2 - ABDF Active

5User ManualSATA 4 Port PCI Adaptor with RAID RC209 Mode 4 - ABCE ActiveNote: There are six SATA ports in Serial ATA 4-Channel RAID adapter.

6User ManualSATA 4 Port PCI Adaptor with RAID RC2093. Connect one end of the Serial ATA cable to the hard disk drive.4. Attach the other end of the Se

7User ManualSATA 4 Port PCI Adaptor with RAID RC209Auto configuration (recommended)The default chunk size is 64k when selecting Auto configuration.1.