Rosewill RC200 Bedienungsanleitung PDF herunterladen (Seite 22)

ULTRA ATA/133 PCI RAID Card RC200 User Manual

7. D:\RC-200\raid (Note: “D:\” represents the drive letter assigned to the CD-ROM drive

you are using. If D is not letter of your CD-ROM drive, substitute D with the correct

drive letter), then click Next.

8. Click Next again, then Finish.

9. Restart Windows to complete driver installation.

＊

For Existing Windows® 98SE Installation

1. Setup the RAID Array prior to driver installation.

2. Install the board and boot up Windows® 98SE.

3. At the Add New Hardware Wizard, click Next.

4. Select Search for the best driver for your device and click Next.

5. Insert the driver CD into the CD-ROM Drive and click Next.

6. Select Search for the best driver for your device(Recommended) from the following

dialog box and type

7. D:\RC-200\raid (Note: “D:\” represents the drive letter assigned to the CD-ROM drive

you are using. If D is not letter of your CD-ROM drive, substitute D with the correct

drive letter), then click Next.

8. Click Next again, then Finish.

9. Restart Windows to complete driver installation.

For Windows® ME

＊

For New Windows® ME Installation

1. Setup the RAID Array prior to Windows installation.

2. Install the board and follow Microsoft procedures to install Windows® ME accordingly.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Keine Kommentare

Rosewill RC200 Bedienungsanleitung Seite 22