Rosewill RCX-Z1 Bedienungsanleitung PDF herunterladen (Seite 2)

Installation InstructionRCX-Z1

Installation Instruction

Warning

Improper installation will result in damage to the processor.

Never switch on the computer system until the fan is connected

on to the motherboard power connector.

SPECIFICATION

Fan Size 92mm

Compatibility AMD Socket 754, 939, 940 & AM2

Bearing Type : Ball bearing for over 45000/hrs

RPM 1700 - 3100 R.P.M.

Air Flow 33 – 57.2 CFM; 1.14 - 3.34mm H20 control by fan controller bracket

Noise Level 18 - 33.4 (max) dB(A)

Power Connector 3 Pin

Heatsink Material : Pure aluminum heatsink with full copper base

Contents

1.100% high grade aluminum heatsink with full copper base

2. 92x92x25mm ball bearing fan

3. Manual fan speed controller on PC back plate, input 12V+-10%, output 6-12V +-10%, Max

output:10 watts per channel

4. AK-455 hi-performance thermal grease pre-applied

5. 3 to 3 Pin female connectors 30 cm adaptor cable

Step ONE

Pre-installation

Ensure the surface of the CPU die is perfectly clean. If any

residue of old thermal compound is present, If any residue

of old thermal compound is present, it may decrease the

cooling performance of Z1.

Hi-performance thermal interface compound has been

pre-applied to the heatsink and protected by a transparent

plastic cover which must be removed prior to installation.

Remove the transparent cover

1 2 3 4

Keine Kommentare

Rosewill RCX-Z1 Bedienungsanleitung Seite 2