Rosewill TFT-LCD Color Monitor R800N Bedienungsanleitung

R910E R910E 19” LCD Monitor User’s Manual www.rosewill.com

R910E 9 Attaching The Optional Wall Mount Arm (not supplied) Follow these steps to finish installing the wall mounting arm: 1. Place

R910E 10 • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference.

R910E 11OPERATING INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the side of t

R910E 12 FRONT PANEL CONTROL • Power Button: Press this button to switch the monitor’s power ON or OFF. • MENU / ENTER : Activate OSD men

R910E 13 1. Press the MENU-button to activate the OSD window. See figure 5. 2. Press or to select the desired function. See figure 5.

R910E 14 Below describes the function of each OSD icon. 1. Contrast Adjust the picture contrast. 2. Brightness Adjust the picture bri

R910E 15 Plug & Play DDC1/2B Feature This monitor is equipped with VESA DDC1/2B capabilities according to the VESA DDC STANDARD. It allows

R910E 16TECHNICAL SUPPORT (FAQ) Problem & Question Possible Solution Power LED is not on *Check if the Power Switch is in the ON position *

R910E 17 Screen image is not centered or sized properly. *Adjust pixel frequency (CLOCK) and FOCUS or press hot-key (AUTO) Picture has color def

R910E 18 NO SIGNAL 1. Check that the signal-cable is properly connected , If the connector is loose, tighten the connector’s screws. 2. C

R910E 1Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio F

R910E 191024 × 768 70Hz 1024 × 768 75Hz 1024 × 768 85Hz 1280 × 1024 60Hz 1280 × 1024 75Hz 1280 × 1024 85Hz 1152 × 864 75Hz 1280 × 960 60Hz

R910E 20 FOR FIRST TIME INSTALL : This is a Plug & Play LCD monitor. Turn off the PC then connect the cables. Power on the PC and it wi

R910E 21APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size 48cm(19.0") Pixel pitch 0.294mm( H )x 0.294mm( V )

R910E 22 Switch • Auto Adjust Key • / Brightness • / Contrast • Power Button • MENU/ Exit • Volume External Controls: Functions • Contrast •

R910E 23 STANDARD RESOLUTION HORIZONTAL FREQUENCY VERTICAL FREQUENCY Dos-mode 640 × 400 31.47kHz 70.0Hz Dos-mode 720 x 400 31.47kHz 70.0Hz

R910E 24 1561011 15 15 - Pin Color Display Signal Cable PIN NO. DESCRIPTION PI N NO. DESCRIPTION 1. Red 9. +5V 2. Green 10. Detect C

R910E 258. N.C. 20. TMDS Data 5- 9. TMDS Data 1- 21. TMDS Data 5+ 10. TMDS Data 1+ 22. TMDS Clock Shield 11. TMDS Data 1/3 Shield 23. TMD

R910E 2 ! Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. ! D

R910E 3• Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor. • For maximu

R910E 4 The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES • Due to the nature of the fluorescent lig

R910E 5 INSTALLATION INSTRUCTIONS SWIVEL BASE Install Remove Figure 1 Installing and Removing the Swivel Base POWERCORD Pow

R910E 6 PREPARING TO INSTALL THE CABLES 1. Remove the wall mounting hole cover. 2. Remove the cable cover. INSTALLATI

R910E 7 CABLE CONNECTIONS 1 – Connect the DC-jack power cable into DC-IN connector on the back of the monitor. 2. Connect one end of the

R910E 8 Preparing To Install The Optional Wall Mount Arm (Not Included) CONNECTIONS This monitor can be attached to a wall mounting ar