Rosewill RNX-N300X Bedienungsanleitung PDF herunterladen (Seite 33)

Wireless LAN PCI Card RNX-N300X User Manual

b/g/n mix; Otherwise system default is 802.11 b/g mix (802.11 b/g/n mix selection item

only exists for b/g/n adapter).

3. Country Region Code: eight countries to choose. Country channel list:

Classification Range

0: FCC (Canada) CH1 ~ CH11

1: ETSI CH1 ~ CH13

2: SPAIN CH10 ~ CH11

3: FRANCE CH10 ~ CH13

4: MKK CH14 ~ CH14

5: MKKI (TELEC) CH1 ~ CH14

6: ISRAEL CH3 ~ CH9

7: ISRAEL CH5 ~ CH13

4. Wireless Protection: Auto, on, and off. System default is auto.

a. Auto: STA will dynamically change as AP announcement.

b. On: Always send frame with protection.

c. Off: Always send frame without protection.

5. Beacon (ms): The time between two beacons. System default is 100 ms.

6. TX Power: Manually force the AP transmits power. System default is 100%.

7. TX Rate: Manually force the Transmit using selected rate. Default is auto.

8. Idle Time: Manually force the Idle Time using selected value. Default is 300.

9. Channel: Manually force the AP using the channel. System default is channel 1.

10. Use Mac Address: Use MAC address of used wireless card to be AP name. System

default is APX (X is last number of Mac Address).

11. Security Setting: Authentication mode and encryption algorithm used within the AP.

System default is no authentication and encryption.

12. No forwarding among wireless clients: No beacon among wireless client, clients can

share information each other. System default is no forwarding.

13. Hide SSID: Prevent this AP from recognized in wireless network. This is disabled as

default.

14. Allow BW40 MHz: Allow BW40 MHz capability.

15. Default: Use system default value.

16. Apply: Apply the above changes.

1 2 ... 28 29 30 31 32 33 34 35 36 37

Keine Kommentare

Rosewill RNX-N300X Bedienungsanleitung Seite 33